Bulldog Keyless Entry System

The 95 Accord I recently purchased had standard power locks. However, the driver's door had been tampered with to the point that the cylinder was totally disconnected from the lock, forcing me to have to go around and unlock from the passenger's side every time. Needless to say, this was quite annoying. After considering trying to fix the mechanical parts, I stumbled across this unit and figured it would be a cheap, practical way to bypass the problem entirely while adding more overall convenience to the vehicle. Amazon delivered it promptly as always, and it was exactly as described and pictured. I chose to install only the basic lock/unlock functionality as I have no need for light flash, starter kill, etc. So far the unit performs perfectly in this capacity. Range is at least 25-30 feet, even without the antenna wire installed in a straight line as they suggest. The remotes seem to be high quality: the buttons are soft but firm rubber, and the case has a rubberized feel and a tiny...Read more

Very cheap, easy to install keyless entry. The only thing holding it back from 5 stars it that out of the box, the range was horrible (10-15ft.) Not sure if this is a problem with old batteries, or if it just has poor range.

Update: The unit has now ceased to work at all. Still getting good power and ground, but unit refuses to operate. Dissapointing since I haven't had it very long.

The unit was easy to test and install and has a range of about 100 feet.

For basic testing, temporarily connect the power and ground wires and listen to internal relay clicks while pressing lock and unlock buttons on one of the remotes.

To get a good range, it is important to place the antenna wire as close as possible to the top surface of the dashboard so that there is no or little metal between the antenna and the dashboard plastic.

The package includes a relay for "starter kill". If you do not need that function, you can use the relay to take advantage of other capabilities that require a separately purchased relay (e.g., parking light lock/unlock confirmation).

The instructions in the documentation for pairing the second remote are apparently outdated. Here is a modified version that worked for me. Press and hold the "lock" button on an already paired remote for about 10 seconds until you hear an internal relay click inside...Read more